@DrWest644
I agree.
There is nothing but repeats of questions going on since the game came out, and way too many users are having the same issues.
Its very frustrating.
And I bought the (Gold?) edition pre-order, so its worse for me, especially since my rig is well over the recommended specs.
I am going to start playing RE:Village or In Sound Mind instead.
Better than playing this 'Tennis' game with support.
Sigh.
Severely frustrated.

Like the subject says, if you have an amazon prime account, you can get the Vaquero pack for FC6 for free. You do have to link steam games to whatever platform you are playing FC6 on, but its pretty cool to get free stuff.
https://gaming.amazon.com/home

Heck, you can even get full games for free! I didnt know about this until just now.
Same page at the bottom.
Ghostrunner, Alien Isolation, Star Wars Squadron, and more full games free. Even cooler now that I know this!

Try going to advanced video options (I think thats where its at), and UP the scaling and let it apply, run around (although you will probably get s*** frames per second. Then go back into video options and change it back to 1.0 and run around.
You might have to go to main menu afterwards, and quit game, and shut down computer. Start computer back up, launch the game, and if its just 'ok', then go back to video options and change fov, then it should be good (if it isnt after shutting down computer and starting back up).
This worked for me, as I was getting things looking like they were hand drawn cartoonish looking in 3d, lol. It was like worse than a console game, with not much graphics/meshes being done correctly, and like the hd pack wasnt even there, let alone regular graphics.
Anyway that set the hd pack on for me. Hope it works for you also.

Well, its back with the Pagan update.

19-10900kf
32gb memory
3090 24gb video card
3x M.2 cards, no mechanical drives.
HD pack installed.
900mb to 55gb pagefile dedicated.

It seems as soon as you hit Escape, or I for Inventory, or M for Map, that this starts acting up.

Its a menu ui memory leak. Or like a poster above said, something getting loaded to memory or vcard that isnt supposed to.

Strange that some people are not experiencing capped cut scenes. I'm also on PC and get a steady 55-60fps during gameplay but as soon as there is a cut scene, FPS drops down to 30fps and stays there until the game resumes.

Same here, except mine goes from 80-90's down to capped 30.
But what I hate the most is the stupid black borders on TOP/BOTTOM/SIDES of the cut scenes. That is what really irks me.

@dave3d07
this did work for me....
Any downloadable content and preorder bonuses you've got for Far Cry 6 will largely become accessible after completing a campaign mission called "The Guerilla". If you do nothing else but pursue Far Cry 6's main plot, this should be done within two hours at the latest, and occurs just after leaving the starting island of Isla Santuario. The full list of campaign missions you'll have to complete is as follows:

1. La Noche de le Muerte
2. The Lucky One
3. Juan of a Kind
4. Du or Die
5. Fuel the Revolution
6. Libertad Rises
7. The Guerrilla

Effectively you'll get all the extras when the entirety of the Yara map opens up for exploration - until then, you're in an unofficial tutorial. However, once that quest is done, you'll get an alert from the game telling you that you can now use all those extras, and they'll be automatically unlocked and added to your inventory accordingly.

@My-Own-Savior
Thank you very much for the info.
I got the croc already, and a couple missions in some lady says you are on your own now, so I figured I was done with the tutorial already.
But, I havent finished the Fuel for the revolution mission yet, been exploring more than trying to do that mission.
Thanks again!

Well, that Chorizo recruting mission expirience was very annoying. Mission is simple, but that character control is awful. Also I just wonder, is it a bug, or Dani can't jump in third-person mode? Dani was stuck in the landscape with Chorizo and croc and I couldn't jump to exit this stuck situation. So, third-person mode is simplified and more restrictive than first-person mode? I understand why wespon gots removed (but it doesn;t matter at all, actually, because you can't kill mission characters - they just regenerate), but no jumping?!

Also, if devs wanted to promote buying skins from the shop - well, they completely missed the point.

You cant jump or sprint or take out gun in a friendly zone/camp. At least I cant. I got stuck in a doorway with croc, and couldnt jump either, had to wait, and try to call him to a different spot. Took 5 minutes, but I finally got out.

I know it suxorz, but I use to play the exact same way, except with arrow keys as strafe/backwards.
I have ended up just using the arrow key Up and Left and Right and Back.
Indeed we are a dying breed (gaming since 1995), and its hard to re-wire the brain, but this is the best solution I could find and still play with all the other keys I was used to. It only took a week or 2 to get used to using Up Arrow as Forward, so considering playing the same way for almost 30 years, a couple weeks isnt bad.
It WILL be bad once they start hardcoding keys to left side keyboard (wasd) as a standard, but until then, a little victory is better than none at all.

Hmmmm.
I posted this bug yesterday, but now it is gone?
Anyway, I found the solution.

1st, you go into Arsenal, mouse click on supremo/weapon/gear, then mouse over (mouse hover) the item and click F (Inspect) (do NOT mouse click, or it wont work), then mouse click whatever is showing an ! , then just mouse over (mouse hover) the items.
Do this for EVERY supremo/weapon/gear, and it will clear them out. New supremo/weapon/gear will also do this, but now you know how to get rid of them.
Ubi Devs, please revert this to the mouse over (mouse hover) like it was before the patch yesterday. Should be an easy fix.

I HAD the same micro-stutters after the patch yesterday (same Ultra settings, HD installed, with Blur turned off).
I FIXED almost all of it by going to video options and turning off FidelityCas(?x?), then running the benchmark. I then shut the game off to main menu, quit the game, waited about a minute, and re-started the game.
There are still little hitches now and again, but the SEVERE micro-stutters are now gone. Also, popin issues are now rarer.
I hope this helps people, and Ubi Devs can look into the issue.

@DrWest644
I agree.
There is nothing but repeats of questions going on since the game came out, and way too many users are having the same issues.
Its very frustrating.
And I bought the (Gold?) edition pre-order, so its worse for me, especially since my rig is well over the recommended specs.
I am going to start playing RE:Village or In Sound Mind instead.
Better than playing this 'Tennis' game with support.
Sigh.
Severely frustrated.

I can ask, but he doesnt do video's, and has kids and a wife, and an over-full-time job, so I can say 100% that he wont do it, or even create an account here.
I said that in my op.
Sorry, just going to have to log it and see if it shows up anywhere during testing.

I do know that he has an i7-9900k, 32gb memory, 3080 video card, and a 21:9 widescreen monitor, but thats about all I know, besides he has finished the game and I have not finished 1 major land area/missions yet (but am close to finishing 1 land), and he connects to me (after I send him a message) via Uconnect friend invite, and I have my FC6 game set to invite only.

Thats about all the info you can expect.
I will try to get him to send me a screenshot though, but he may not even do that.

Well, its back with the Pagan update.

19-10900kf
32gb memory
3090 24gb video card
3x M.2 cards, no mechanical drives.
HD pack installed.
900mb to 55gb pagefile dedicated.

It seems as soon as you hit Escape, or I for Inventory, or M for Map, that this starts acting up.

Its a menu ui memory leak. Or like a poster above said, something getting loaded to memory or vcard that isnt supposed to.

Hello @UbiSupportStaff.
I have already verified the game files a couple/few weeks ago and updated my video drivers to the latest last week, and did the list of what-not's in that article, and it does not matter.
As for me connecting to him, I was hoping to play with him today, but he was not available, so I just played the Pagan dlc by myself. I have all 3 of my major camps, but I still have not finished even the 1st area yet (not the 1st island, but the 3 major areas/land) according to my buddy. So it may be next year until I actually finish the game at this pace, and I dont want my game to crash and maybe get corrupted until I finish the game, so yeah it may be a very long time until I connect to him (but, I think I DID connect to his game one time when he 1st got the game and was close to where I was at the time), maybe thats when all this started. I dont know. I game so infrequently, and I had the game pre-installed the day before it go released.

@UbiSupportStaff.
No problem.
But, another issue is back with todays (or whenever the Pagan Min dlc came out, for me its today, lol) dlc.
I am back to the game showing 6.xx being used, AND it says out of 12GB. Not 24GB like it used to say with the Dec. update, but now it says 12GB.
Also, the Pop-in issue is SUPER bad, Like, 2 feet away bad. The textures are not loading properly at all in a timely manner.
Also, the shadows are TERRIBLE. Rocks on the ground (3-5 of them together on the ground, no matter on a beach scene, or in-the-grass scene, or mountains scene, they look like a jumble of roundish black objects until you get 2 feet away from them. Also, the lighting Pop-in texture is a hot mess also (I actually have a couple of screenshots of kind of both issues, but it is inside the tunnels/caves of the Pagan Mims dlc. Look at the black that should be shadows, and then think a pile of rocks anywhere in the game, either in direct sunlight, moonlight, any light. Just black shapes until you almost stand on them (much worse than pictured, because this is close-up pics). Same exact game settings, nothing has changed except the dlc.

3840x1600 is my resolution, as posted above. 144hz. Max FOV (but it does it at default fov also, so it doesnt matter).
The game automatically changes the FOV to whatever situation is going on, while playing the game (the game engine does this automatically based on what is going on, and no, I checked, my fov is still set at the highest possible setting (104? 109? Sorry, today is the 1st time I have been up out of bed since my last post, and saw the new 2nd dlc and played that instead of the regular game, and that doesnt have any cutscenes in it, and I am checking my posts before going back to bed).
The game engine changes it in the engine, not in the settings ui. You know, like when you are walking the fov and resolution are correct, but when you go into a base camp (yours, not an enemy camp) it goes to 3rd person. THAT is the engine switching the fov and/or resolution. Or walking/running it is fine, but when you get into ANY vehicle (or on a horse), it switches to a different view and fov and resolution (although with the latest patch, the horse isnt that bad anymore, its just the vehicles, cutscenes, and bases now). Or, when it switches to a cutscene (no matter what you were doing before), it shows a small cutscene in a different resolution (guessing 1920x1080, because it is so small) with black bars all around it, just like the link I posted to another person on the forums that uploaded his screenshot further up this thread.
Its the way the game was developed, and if you tell the programmers (devs) that, they will know exactly what you are saying. They know. They programmed it.
It doesnt matter the video settings on ultrawidescreen monitors (although the game is set to my single monitor, I do NOT have multiple monitors, and the fov is at max, although that doesnt matter because it did the same thing at Default fov and at fov = 90), it is a widescreen/Ulra-Widescreen gaming issue that the devs never fixed. Trust me, they know HOW to fix it, and they know WHY it is like that, but I dont know why you guys/gals keep asking for more info. I have given my screen resolution and fov (heck, I have posted my whole rig specs before), and I KNOW they know what is going on. No developer of a video game can say they dont understand what is going on.
Sorry, not mad, just aggitated that this keeps bouncing back and forth, when I know they have logged the bug already, before shipping, and I have VERY limited time to game (like, 1-2 times a week, or every other week, or in 3 weeks) because I am disabled, and all these bug logging I have done really eats into my game time, which I dont have much of, and I have a LOT of games (New and older) I have never played or have not finished, not just FC6. What takes others a few minutes to do, could/usually takes me 10-20x longer to do.
Next time I am on, I will try to get screenshots, although you cant really tell from a screenshot except the cutscene issue. Well, maybe you can, but it would probably be best looked at in a video (which I have NO intention of doing, nor CAN I do a video). The best bet at reproducing the issue is to actually spend money on a monitor that has the issue (mine is an Acer Predator X38), and play the game on a machine without ANY dev tools installed, nothing but os/motherboard/video card/peripheral/game drivers and an ulra/widescreen monitor. Not in vmware, not on a console, not on a dev or engineer machine, not on 1920x1080 or 4k, maybe on their kids gaming machine with an ultra/widescreen monitor like the one I said I have.
As for the cutscene issue, again, its exactly the same as the other poster in the link. I doubt I would remember trying to even get a screenshot DURING a cutscene, since those tend to be SUPER immersive (except with black bars. Only because its the only different thing going on in the game after 15 hours of gameplay, the game gets pretty repetitive).
I have 2 screenshots of my video layout, Quality setting, so I will upload what I have and get the rest later (I think these were taken last week or 2 weeks ago, so dont mind the build number. The Monitor one will be todays that I get and post later).

EDIT:
OK, I uploaded Advanced video pic, and Monitor also.
After this, I am done.
I am moving on to another game if these stuttering and widescreen and texture loading issues dont get fixed pretty quickly.
I am getting too frustrated over gameplay issues that should not have been issues on release day, and all this time later its the same thing: Can you provide us more info? Then provide, then next time: Can you provide us more info? Ad-Infinitum.
Sorry, I know you are only doing your job, but the devs arent doing theirs, and are fobbing all this back and forth like a Tennis match, just so they can get the next dlc out and then forget the game and on to the next.
Too buggy to play, too frustrated to play anymore.
I will respond to each of my bugs one more time, but if its another 'More info' then I am done with these forums and the game.
Way too frustrated. 4 hours to get, rename pics, upload them, and give all the info you guys ask for, when I could have been gaming for all that time.

O M G am I dumb! (really, I am old and blind and colorblind, lol, and in Dark Mode it just looks all gray to me).
Thank you. Very much.

And Yes I have a compatible Corsair product, No I dont have any MSI product (even Afterburner was only on my system while troubleshooting a graphics card issue long ago, then it was Uninstalled), and No I dont have a Controller (never have, never will). I Do have Colorblind mode on. No Tobii or any other tracking, no VR anything, and no bluetooth anything..


Here are the shots:

Hello.
Reporting a bug I have forgotten about until today when my buddy reminded me of it.
But, since the launch of the game, when he joins my game, and we fast travel to anywhere, HE loses his mini-map AND map/Locations/etc, until we go to a new area, then it magically comes back for him.
My mini-map (I always host) and map are unaffected. I have them all the time.
But, since he drives/fly's most of the time, and he CANT see any markings on the map (quest items, locations, etc), AND his mini-map disappears, it is a pretty big issue, since he has no idea where we are going. If I place a waymarked on where we are going, he can see that on his map, but still with no mini-map at all he has to rely on me telling him to go north, or right, or left, until his mini-map comes back (and the ability to see things/locations/quest markers, etc on the regular map).
Please dont ask for a screenshot, because he lives in a different state than I do, and I cant seem to post pic's on this forum anyway.
And, its easy to reproduce:
PC
He joins my game.
We start playing.
Eventually we fast travel somewhere.
He loses his mini-map (gone, nowhere to be seen on his monitor).
He loses the ability to see any quest markings/locations on the regular map.
We ride/fly where we are going.
At some point, the game resets (probably a new area that needs to be loaded into memory), and BAM! He has his mini-map back on-screen and the ability to now see quest items/locations/etc on his regular map.

Thank you.

Its not our computers or monitors.
The developers made the cutscenes in 16:9 (and probably a single 4k) ONLY. This means that the cutscenes ONLY PLAY in that resolution, and our monitors are neither 16:9 or whatever 4k images they used, so we get a tiny window with black bars around it.
The developers need to patch the game to UPSCALE the cutscenes to the proper resolution.

This is what happens when you either:
A. Outsource QA to a crummy qa facility with very strict rules on what they can and cant test (and, these qa facilities are limited by whatever hardware they have, which is usually the exact same hardware for every tester).
B. Have in-house QA testers that are limited by whatever hardware they have, which is usually the exact same hardware for every tester.
C. Only the Developers tested the game while they were writing the code.
D. Used the game engines default setting to create cutscenes.
E. Outsourced (or In-House-Sourced to another dev studio) the CutScenes and only tested them on certain hardware.
F. Knew about this issue long before releasing the game because most people have consoles and this hits the middle of the road people (where-as we who have 21:9 or higher are the few percenters, not the norm), and are now either trying to play catch-up, or trying to never fix the issue, because well they have patches and DLC and this is low on the priority list (which is understandable, crashes are priority 1, and this issue is for the meager percent of people who have over 16:9). ((( THIS. And we probably will never get a fix either, or get it long after we have finished the game)))
G. Or, multiple, most, or all of the above. Compared to crashes (like I said above), connectivity issues, game not displaying properly at all, gameplay breaking issues, Coop, etc etc etc, this is very low on the priority list.

Sorry if it seems like I am attacking the Devs or Ubi, I am not, and certainly dont mean to come off like I am. But, I worked as a Software QA Tester for 14 years, and I know of which I speak.
This game should never have shipped like this. It should not be difficult to scale a cutscene to a resolution.

BTW:
My resolution is:
3840 x 1600

Hello.
I got the updates, I verified the game files, and I still have Tobii set to On (and, even 'Controller' in multiple places is actually not only On, but I can set settings, they are not grayed out, and I have never, ever, ever had a controller on any of my computers, let alone my latest one that is running FC6). As of today, 12/31/2021 ( Happy New Year everyone!! ).

I have no idea how to upload the screenshots though?
I am using a computer browser, and usually there is an Upload option somewhere, but I cant find it on this site.

(I have the save screenshots in .jpg format, but I dont use twitter,facebook, or any of the 'social' media, and a search through the @ubisoft forum and trying through UConnect doesnt show anything about uploading screenshots). THANKS!